What life-cycle assessment does and does not do in assessments of waste management

In assessments of the environmental impacts of waste management, life-cycle assessment (LCA) helps expanding the perspective beyond the waste management system. This is important, since the indirect environmental impacts caused by surrounding systems, such as energy and material production, often override the direct impacts of the waste management system itself. However, the applicability of LCA for waste management planning and policy-making is restricted by certain limitations, some of which are characteristics inherent to LCA methodology as such, and some of which are relevant specifically in the context of waste management. Several of them are relevant also for other types of systems analysis. We have identified and discussed such characteristics with regard to how they may restrict the applicability of LCA in the context of waste management. Efforts to improve LCA with regard to these aspects are also described. We also identify what other tools are available for investigating issues that cannot be adequately dealt with by traditional LCA models, and discuss whether LCA methodology should be expanded rather than complemented by other tools to increase its scope and applicability.     

Transport of ammonium perfluorooctanoate in environmental media near a fluoropolymer manufacturing facility

In order to understand better the pathways for transport of ammonium perfluorooctanoate (APFO) from a point source, a focused investigation of environmental media (water and soil) near a fluoropolymer manufacturing facility (Site) was undertaken. Methods were developed and validated at 2 microg kg(-1) [the limit of quantitation (LOQ)] in soil, and at 50 ng l(-1) in water. Environmental media were sampled from a public water supply well field located north of the Site, across a river. The data suggest that APFO air emissions from the Site are transported to the well field, deposited onto the soil, and then migrate downward with precipitation into the underlying aquifer.     

Volatile organic air contaminants in plants

Comparative investigations of the sorption process of gaseous toluene were performed using fruit material (orange peel) and the mixture of chemically bonded phases (CBPs) as sorbents. For this study, a specially constructed system that allows exposure of sorbents to volatile air contaminants at constant concentrations was applied. The results for the prepared packings indicate a typical adsorption process described by Langmuir isotherm. In the case of orange peel, a mixed mechanism of the sorption process is suggested.     

Conflicts between biodiversity conservation and human activities in the central and eastern European countries

Conflicts between the conservation of biodiversity and other human activities have been and continue to be of increasing concern in the European Union, often having important political, economic, and environmental repercussions. These conflicts have been addressed in the European Union by using a wide array of top down and bottom up tools, with varying degrees of success. A new challenge is now facing Europe with the integration of 10 new countries in the European Union (EU) and an additional range of biodiversity-rich habitats placed under EU legislation. The rich biodiversity of the central and eastern European countries (CEEC) is likely to be threatened by some aspects of the integration process, and conflicts between the conservation of biodiversity and other human activities are expected. In this paper, we review certain existing conflicts between biodiversity conservation and human activities in the CEEC, expected conflicts associated with integration to the EU, particularly in terms of new policy and legislation implementation, and, finally, explore possible conflict management options.     

Morphological change and phenotypic plasticity in native and non-native pumpkinseed sunfish in response to competition

Non-indigenous species are oftentimes exposed to ecosystems with unfamiliar species, and organisms that exhibit a high degree of phenotypic plasticity may be better able to contend with the novel competitors that they may encounter during range expansion. In this study, differences in morphological plasticity were investigated using young-of-year pumpkinseed sunfish (Lepomis gibbosus) from native North American and non-native European populations. Two Canadian populations, isolated from bluegill sunfish (L. macrochirus) since the last glaciation, and two Spanish populations, isolated from bluegill since their introduction in Europe, were reared in a common environment using artificial enclosures. Fish were subjected to allopatric (without bluegill) or sympatric (with bluegill) conditions, and differences in plasticity were tested through a MANOVA of discriminant function scores. All pumpkinseed populations exhibited dietary shifts towards more benthivorous prey when held with bluegill. Differences between North American and European populations were observed in body dimensions, gill raker length and pelvic fin position. Sympatric treatments induced an increase in body width and a decrease in caudal peduncle length in native fish; non-native fish exhibited longer caudal peduncle lengths when held in sympatry with bluegill. Overall, phenotypic plasticity influenced morphological divergence less than genetic factors, regardless of population. Contrary to predictions, pumpkinseeds from Europe exhibited lower levels of phenotypic plasticity than Canadian populations, suggesting that European pumpkinseeds are more canalized than their North American counterparts.     

UVC Inactivation of dsDNA and ssRNA Viruses in Water: UV Fluences and a qPCR-Based Approach to Evaluate Decay on Viral Infectivity

Disinfection by low-pressure monochromatic ultraviolet (UVC) radiation (253.7 nm) became an important technique to sanitize drinking water and also wastewater in tertiary treatments. In order to prevent the transmission of waterborne viral diseases, the analysis of the disinfection kinetics and the quantification of infectious viral pathogens and indicators are highly relevant and need to be addressed. The families Adenoviridae and Polyomaviridae comprise human and animal pathogenic viruses that have been also proposed as indicators of fecal contamination in water and as Microbial Source Tracking tools. While it has been previously suggested that dsDNA viruses may be highly resistant to UVC radiation compared to other viruses or bacteria, no information is available on the stability of polyomavirus toward UV irradiation. Here, the inactivation of dsDNA (HAdV2 and JCPyV) and ssRNA (MS2 bacteriophage) viruses was analyzed at increasing UVC fluences. A minor decay of 2-logs was achieved for both infectious JC polyomaviruses (JCPyV) and human adenoviruses 2 (HAdV2) exposed to a UVC fluence of 1,400 J/m², while a decay of 4-log was observed for MS2 bacteriophages (ssRNA). The present study reveals the high UVC resistance of dsDNA viruses, and the UV fluences needed to efficiently inactivate JCPyV and HAdV2 are predicted. Furthermore, we show that in conjunction with appropriate mathematical models, qPCR data may be used to accurately estimate virus infectivity.     

In-vehicle VOCs composition of unconditioned, newly produced cars

The in-vehicle volatile organic compounds （VOCs） concentrations gains the attention of both car producers and users. In the present study, an attempt was made to determine if analysis of air samples collected from an unconditioned car cabin can be used as a quality control measure. The VOCs composition of in-vehicle air was analyzed by means of active sampling on Carbograph 1TD and Tenax TA sorbents, followed by thermal desorption and simultaneous analysis on flame ionization and mass detector （TD-GC/FID-MS）. Nine newly produced cars of the same brand and model were chosen for this study. Within these, four of the vehicles were equipped with identical interior materials and five others differed in terms of upholstery and the presence of a sunroof; one car was convertible. The sampling event took place outside of the car assembly plant and the cars tested left the assembly line no later than 24 hr before the sampling took place. More than 250 compounds were present in the samples collected; the identification of more than 160 was confirmed by comparative mass spectra analysis and 80 were confirmed by both comparison with single/multiple compounds standards and mass spectra analysis. In general, aliphatic hydrocarbons represented more than 60% of the total VOCs （TVOC） determined. Depending on the vehicle, the concentration of aromatic hydrocarbons varied from 12% to 27% of total VOCs. The very short period between car production and sampling of the in-vehicle air permits the assumption that the entire TVOC originates from off-gassing of interior materials. The results of this study expand the knowledge of in-vehicle pollution by presenting information about car cabin air quality immediately after car production.